ASTM D573 Hot Loop Aging Anti - Yellow Testing Machine With EGO
Over - Temperature Guiding Light
Main feature:
Aging:this machine is to promote the deterioration of vulcanite,
and then to calculate the change rate of tensile and elongation.
But also the role of ultraviolet radiation to simulate sun and
heat, the specimen in the machine in the desks by ultraviolet
radiation and temperature effects, over time, observed the extent
of the sample resistance to yellowing, discoloration of gray scale
can be used as a reference, to determine its yellowing
level.Product in the course of radiation or by sunlight during
transport, the impact of the container environment change in color
caused by the occurrence of the defective product in this machine
using the UV lamp 300W, so that experiments can be completed in a
shorter time, this machine can be used as the basicresistance to
yellowing test, also when the aging test machine and oven use,
showing a multi-function machine This machine is equipped with
forced hot air circulation control system to ensure uniform
temperature distribution.
ZL-6009A
aging anti-yellow testing machine.pdf
Anti-yellow:
This machine simulate atmospheric environment which driven by the
sun ultraviolet radiation, Generally consider being tested 9H in
the 50 degree is theoretically equal to 6 months exposed at the
outside atmosphere.
Working principle
The compounding agent mass passes through the gap between the rotor
and the rotor, the gap between the rotor and the upper and lower
top bolts and the inner wall of the internal mixing chamber
together with the rubber, is sheared and broken, surrounded by
tensile deformed rubber, and is stable in the broken state. At the
same time, the convex edges on the rotor make the rubber move along
the axial direction of the rotor, play the role of stirring and
mixing, and make the compounding agent mix evenly in the rubber.
The compounding agent is repeatedly sheared and broken, the rubber
material is repeatedly deformed and restored, and the rotor convex
edge is continuously stirred to make the compounding agent disperse
evenly in the rubber material and reach a certain degree of
dispersion. Because the shearing effect of rubber material during
mixing by internal mixer is much greater than that of open mixer
and the mixing temperature is high, the mixing efficiency of
internal mixer is much higher than that of open mixer.
Corresponding standard:
CNS-3556,JIS-K6301,ASTM-D2436,ASTM D1148, BS 5131,ASTM D573
Applicable industries:
It is widely used in paint, resins, plastics, printing and
packaging, aluminum, adhesives, auto, cosmetics, metals,
electronics, electroplating, medicine, etc..
Technical parameter:
| Model | ZL-6009A |
| Inside size | 40×40×45cm |
| Volume | 91×55×100cm |
| Temperature | Room temp ～ 200℃ |
| Temperature resolution | 0.1 degree |
| Accuracy | ±1 degree |
| Timer | 0-999H,memory-type with buzzer |
| Control mode | Automatic calculation controller |
| Wheel speed | Dia.45cm, 10R.P.M. ±2R.P.M |
| UV lamp | UV300W |
| Heating | Hot loop |
| Protection | EGO over-temperature guiding light,overload switch ammeter |
| Material | Inside SUS#304 stainless steel,outside high-level paint |
| Weight | 87kg |
| Power | 1∮,AC220V,19.5AC |
FAQ
1. How to choose the most suitable Mechanical Equipment ?
Our professional team will give you the best suggestion as long as
you tell us what kind of test you need to do andthe required
specification.
2. What’s the delivery term?
At most of time, we have stock in the factory. If there is no
stock, normally, the delivery time is 15~20 working days after
deposit receipt. If you are in urgent need, we can consider making
special arrangement for you.
3. Do you accept customization service?
Yes, of course, we can not only offer standard machines, but also
customized machines
according to your request. Don’t hesitate to tell us your
requirement, we will try our best to meet your needs.
4. Can we visit your factory before order?
Yes, we warmly welcome and sincerely invite you or your team to
visit our factory, we will help to arrange hotel and pick up you
from airport.
5. Do you have customers of our country before?
Now our testing machines have been sold to more than 95 countries,
like USA, Canada, Russia,UK, Italy, Germany, European , India,
Pakistan, Philippine, Singapore, Malaysia,Thailand , Vietnam,
Korea,Saudi Arabia,Brazil...and so on.
