BTC Four - chamber Touch Ccreen Independent Temperature Control
Precision Oven
Product Description:
It is mainly used for high-temperature testing, drying, baking, and
disinfection of non-volatile and non-flammable and explosive
samples. It can also be used for general constant temperature test
work. It is an essential equipment for laboratories and scientific
research units.
This product has the following characteristics:
◆Using the block assembly structure, the surface uses epoxy powder
electrostatic spraying technology;
◆Using digital display, digital setting temperature, can reduce
visual reading error and operation error;
◆With independent over-temperature protection, over-current
protection and other functions.
Way To Control:
Balanced temperature control system (BTC) + specially designed fan
forced air circulation system, control SSR by P.I.D., so that the
heating amount of the system is equal to the amount of heat loss,
so it can be used stably for a long time.
Technical Parameter:
At room temperature 25 ℃, no load:
| Temperature range | room temperature +10℃～+260℃ |
| Temeprature fluctuation | ±0.5℃ |
| Temperature uniformity | ±1.5%℃ |
| Heating rate | heating rate ≥ 4-6℃/min. room temperature to 200℃ heating rate ≤ 45
minutes |
| Internal dimensions | W830×H370×D475×4 mm |
| External dimensions | W2100*H1500*D720 mm (subject to actual product) |
Product Structure:
| Inner box material | Stainless steel plate |
| Outer box material | Iron plate paint (beige) |
| Cavity structure | Four-chamber combination, upper two lower two, each cavity
independently controls the temperature and time, the control box is
located above the machine |
| Control method | 7-inch touch screen control, four-chamber independent control,
independent operation |
| Thermal insulation material | High-density glass fiber thermal insulation cotton |
| Urgent | 8 high temperature resistant |
| Intake and exhaust air outlet | The exhaust air outlet is diameter: Ф100mm, located directly behind
the machine |
| Exhaust port | Integrated exhaust motor duct., independent exhaust system, and
then collect exhaust air at the place where the body is lower than
the lower oven |
| Wind circulation mode | Motor rear, horizontal circulation mode |
| Storage rack | A layer of storage rack at the bottom of the box |
| Heater | Use Taiwan imported stainless steel finned radiator U-shaped
heating tube |
| Box door | Clear touch button handle. |
| Alarm | The alarm device is unified as:three-color lamp with sound and
light |
| Over-temperature protection | Over-temperature and working temperature are displayed as digital
display. When the circulating fan fails or exceeds the
over-temperature set temperature, the device will alarm and
automatically disconnect the heating system |
Protective Device:
1. Contactor: French Schneider
2. Thermal relay: French Schneider
3. Temperature controller: Kebao
4. Over-temperature protector: Taiwan.
5. No fuse switch: Taiwan.
6. Solid State Relay: Taiwan
7. Switch button: Taiwan.
8. Dry burn protector: Italy.
Main Controller:
| Control method | Balanced thermostat control system (BTHC), which controls SSR in
P.I.D. mode, so that the heating amount of the system is equal to
the amount of heat loss, so it can be used stably for a long time. |
| Controller features | Independent research and development design Programmable Logic Controller LCD, color screen display Touch type Yingying direct button type Temperature programmable controller Chinese and English display 7 inch true color big screen Large contrast LCD controller with adjustable backlight function. |
| Controller specifications | Accuracy: temperature ±0.1℃ Resolution: temperature ±0.1 With upper and lower limit standby and alarm function Temperature input signal selection K type×1 9 groups of P.I.D control parameter settings, P.I.D automatic
calculation Dry ball automatic correction |
| Picture display function | Use the picture to talk style, no key input, the screen directly
touch the option Direct display of temperature setting (SV) and actual (PV) values Can display the current execution program number, segment,
remaining time and cycle number Operation cumulative time function The temperature program setting value is displayed as a graph
curve, with real-time display program curve execution function With a separate program editing screen, at least 5 segments of
temperature and time can be entered on each page Chinese and English can be switched at will. The fault prompt screen is displayed. The screen can be adjusted for backlight The screen display protection function can be set for timing, TIMER
or manual shutdown. |
| Program capacity and control function | Available program groups: up to 120 PATTEN Usable memory capacity: a total of 1200 SEGMENTS Repeatable command execution: each command can be up to 999 times The program is produced in a dialogue style, with functions such as
editing, clearing, and inserting SEGMENTS time setting 0～99Hour59Min With power-off program memory, it can automatically start and
resume program function after power-on Graphical curves can be displayed in real time during program
execution With appointment start and shutdown function With date and time adjustment function Key and screen lock (LOCK) function |
Supplementary Explanation:
Use voltage: 380V±10% 50HZ 12KW
Use environment: Allowable use environment 0 ~ 30℃
Performance guarantee environment 5 ~ 25℃
The installation floor must not be significantly inclined
No other items can be placed within 60cm around the instrument
Items excluded from appraisal: 1. Preparation for setting up site
2. Input side electrical equipment
3. Input side electrical wiring project
Provide documents:
- Instructions for use Provide a copy on delivery
- Product Warranty Card Provide a copy upon delivery
