GB12831-86 Paint Xenon Lamp Aging Comprehensive Climate Testing
Machine
The GB12831-86 Paint Xenon Lamp Aging Comprehensive Climate Testing
Machine is a sophisticated environmental testing instrument
designed to simulate sunlight, temperature, rainfall, condensation,
and humidity conditions to evaluate material performance and
durability.
Equipment Overview
This xenon lamp aging testing machine performs comprehensive
climate testing, including material lightfastness evaluation. It
exposes polymer materials to simulated sunlight conditions and is
ideal for selecting new materials, improving existing materials, or
assessing changes in material composition.
Key Features
- Constructed with cold-rolled steel sheet electrostatic coating or
high-quality stainless steel
- Solar spectrum xenon lamp radiation source with automatic
irradiation intensity tracking
- Precise control of blackboard temperature, irradiation cycle, dark
cycle, and spray cycle
- Ultraviolet radiation sensors for real-time light energy monitoring
and adjustment
- Water spray cycle effectively simulates temperature changes and
rain erosion processes
- Available with imported touch screen control or intelligent digital
display instruments
Main Functions
Exposes samples to high temperatures and alternating cycles of
light and moisture environments. Uses xenon lamp tubes to simulate
sunlight radiation, and condensation/spray water to simulate dew
and rain. Accelerates aging damage that would normally take months
or years to occur in outdoor environments, including fade, color
change, fracture, crack, wrinkle, foaming, embrittlement, strength
reduction, and oxidation.
Applications
Widely used for quality control in electronics, plastic products,
electrical appliances, instruments, food, vehicles, metals,
chemicals, building materials, aerospace, and medical care
industries.
Technical Parameters
| Parameter | Specification |
|---|
| Model | ZL-6011C |
| Testing Room Dimensions | 700*500*400mm (W*L*H) |
| Temperature Range | RT/10℃~80℃ |
| Humidity Range | 65～98% RH |
| Spray Time | 1～9999min, adjustable |
| Spray Cycle | 1-240min, interval adjustable |
| Irradiance | 350W/㎡～1300W/㎡ (300～800nm) |
| Light Source | 2*1800W air-cooled xenon lamp |
| Xenon Lamp Power | 1kw, 6kw (longevity: 1600H) |
| Control Accuracy | Temperature: ±0.1℃, Humidity: ±0.1% RH |
| Blackboard Temperature | 40℃~110℃ (±3℃) |
| Power Supply | AC380V±10% 50±0.5HZ, Three-phase five-wire system |
Compliance Standards
GB12831-86, GB/T1644.2-1999, GB/T8427-89, GB/T8430-98, GB/T1865-97,
GB/T16991-97, GB/T5137.3-96, GB/T16259-96, GB/T2423.24-95, ASTM
G155-05a
Test Methods and Procedures
Fixed: 12 international and national xenon lamp aging test
standards. Program capacity: 4 editable programs, maximum 1200
blocks. Simulates different test conditions using various internal
and external filter covers. Automatic control, monitoring, and
display of light/dark cycles.
Operating Conditions
- Temperature: 15℃~35℃
- Relative humidity: less than 85% RH
- Without strong vibration and strong electromagnetic fields
- Without high concentration of dust and corrosive materials
- No direct sunlight or other heat radiation sources
- Stable, level placement with adequate maintenance space
- Well-ventilated installation site with proper grounding
Safety Protection Features
- Power overload and short circuit protection
- Ground protection
- Over temperature protection
- Water shortage protection
- Automatic power cutoff with audible alarm for all protection
functions
