Equipment summary:
Fabric Tear Strength Testing Machine is a simple type machine,
simple structure, convenient
operation, It can be tested on the operated table, Using the
electronic control systems, load sensor is
rising and falling to test the tension or compression through the
motor rotation, transmission
machinery and T-screws. This machine is simple to operate,
especially suitable for controlling quality in
production line, This series of machine is mainly applied to test
the non-metallic and metallic materials
which the load is less than 1KN.
ZL-8004A electric desktop digital tensile testing ...
Main functions:
Fabric Tear Strength Testing Machine can be test all the material
in tensile, compression, bending,
shear, peel, tear, two-point extended (need add extensometer) and
others for control products quality.
Such as textile, rubber, plastics, synthetic leather, tape,
adhesive, plastic film, composite materials, electronics,metals and other materials,
Corresponding standard:
GB/T16491-1996 electronic universal testing machine
Applicable industry:
Desktop Adhesive Tape Tensile Testing Machine is widely used in
wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto
parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research
laboratories; inspection arbitration, technical supervision departments and many other industries, it is
the basic equipment for quality management and physical tested.
Technical parameters:
| Model | Single pillar Fabric universal Tensile Strength Testing Machine |
| Maximum load | 1KN |
| Capacity choice | 200N,500N,1KN |
| Unit | KG,N,LB, TON |
| Measurement system | Load cell |
| Accuracy load of measurement | the load cell + LCD screen ± 0.5% (full range of 5% -100%) |
| Resolution | 1 / 50000 |
| Maximum test stoke(excluding fixtures) | About 500mm |
| Test speed | 50-300mm / min with stepless speed and 5 fixed-speed |
| Data sampling frequency | 200times/sec |
| Machine with thermal printers can automatically output the testing
results. |
| Can store 10 testing results and auto-calculate its average,
auto-grab maximum force and the force at break. |
| Display | LCD display, membrane touch keys, with the following functions. |
| Machine size | 45x58x135cm |
| Weight | 75KG |
| Ratio of Breakpoint | from 0 ~ 99%, which the user can set according to different
materials to stop the machine, realizing stop machine at any position. |
| Safety | The system would shut down if overload or over-trip. |
| Shape | column shell is made of aluminum material. |
| Power system | AC Motor |
| Power | 120W(depending on different demand of force using different motor) |
| Power supply | Single Phase, 220V, 60HZ |
Imported photoelectric encoder is used for displacement
measurement. The controller adopts an embedded single-chip
microcomputer structure with built-in powerful measurement and
control software, which integrates measurement, control,
calculation, and storage functions. With automatic calculation of
stress, elongation (extensometer required), tensile strength,
modulus of elasticity, automatic statistical results; automatic
recording of the maximum point, breaking point, designated point
force or elongation; using a computer for testing Dynamic display
of the process and test curve, and data processing. After the test,
the graph processing module can be used to enlarge the curve for
data analysis and editing, and the report can be printed. The
product performance has reached the international advanced level.
