Solution Compensation High-orecision Multi-function Solid
Densimeter
Specifications
DE-200M High-orecision Multi-function Solid Densimeter
1. Manutacturer.
2. Easy operation & maintenance.
3. High Accuracy.
Application:
Powder Metallurgy,magnetic Materials,Hard Alloy,Rubber,Plastic,Wire
and Cable,Laboratory,Institute of New Materials Researching and
Testing.
Field of quality management,cost control,formula researching and
developing,density
test of small products and high-precision products,research of
material density.
Standards:
According to the ASTM D792,ASTM D297,GB/T1033,GB/T2951,JIS
K6268,ISO 2781,ISO 1183,GB/T208,JB/T7780 standards etc.
Density resolution of DE-200M is 0.0001 g/cm3. No need to open and
close the lip with the uni case aluminum alloy board. It is more
high-precision,convenient, rapid,hommization. Provide many
measuring methods for porosity materials,such as saturation method
and surface covering method. Density,open pore volume,total
porosity and porosity can be read. It can be used to automatically
judge whether the sample is qualified or not,and prompt alarm. It
has the function of top and bottom limitation,measuring the volume
abrasion value DIN of rubber,measuring expansibility,measuring true
density and performance density of powder,measuring oil content of
oil bearing,and measuring ceramic desnsity and porosity.
Specification
Density resolution: 0.0001 g/cm3
Maximum weigh:200g
Minimum weigh:0.001g
Measuring range: 0.0001—99.9999g/cm3
Features
No need to open and close the lid; Simple operation;Shorter time;
According to the specification of new materials laboratory.
Show the percentage composition of mixed samples for researching
and developing new materials.
Apply to powder metallurgy,magnetic materials,ceramics,fireproofing
materials,precious metal and so on.
Automatically judge whether the sample is qualified or not and
prompt alarm.
Function of solution compensation.necessary if liquid other than
water is used as a medium for measuring.
Function of setting actual water temperature,measuring medium
density,and water proof medium density.
Function of setting aerostatic buoyancy compensation and the bound
of density.
Adopt the uni case high-capacity measuring accessories with the
transparent
injection mold tank,which can resist wear,fall off,and corrosion.
Adopt the uni case dedicated wind and dust cover,which makes the
combination convenient and durable.
Interface of RS-232C is included.the printer of DE-40 will be
available to connect PC with printer.
Standard Accessories:
Host,Tank,Testing board ,Tweezer,Thermometer,100G weight,Wind and
dust
cover,A set of measuring grain accessories,A set of measuring
floating body
accessories,Power transformer
Measuring Procedure of Hydroscopicity Products:
Place sample on testing board to measure weight in air,and then
press ENTER button to memory.
Place sample that did waterproof treatment into water to measure
weight in water,and then press ENTER button to memory. Density
value is displayed.
