PLC Automatic Drop Tester RS-DP-03H , AC Variable Frequency and
Speed Motor
Application:
This machine is aimed at assessing the effect of unintentional drop
of the product by user in
actual use on the product performance, which is applicable to the
original-gesture drop test
of mobile phone, tablet, e-reader, telephone, e-dictionary, and
other consuming electronic
products.
Structures and Functions:
1. This machine adopts AC variable-frequency and variable-speed
motor plus synchronous
pulley for adjusting drop height range, which is durable;
2. This machine adopts a color LCD touch panel plus PLC for motion
control and set, by
which drop cycles can be preset and power-off memory function is
provided; all control
parameters will be set via the touch panel: drop, reset, height
setting, number of drops
and count, etc.;
3. Operator just needs to input the size of the product to be
subject to drop test via the screen
only: length L, width W, thickness T, diagonal interval DI; so that
the tester can auto raise up
to the set drop height for testing;
4. After the drop finishes, the fixture block will automatically
return to the set sucking height
(generally, at a height of 600~800mm);
5. 4 corners, 8edges, 2 faces, 4 sides can be set to drop and
impact on base, if the product is
not regular shape, we can make the clamping fixture for the test;
6. The product will be released at the height around 300mm, that
can make sure the impact
gesture of the product on the base;
7. the drop bases: steel plate, marble board, wood board;
8. The adoption of Japanese THK high precision low friction slide
rail, the friction effect of fixture
during dropping can be minimized.
Specification:
| Model | ZL-1605 |
| Max drop height | 300~2000mm |
| Max sample weight | 2kg |
| Drop height setting | Touch panel setting and display |
| Min release height | 300mm |
| Counter | 0~999999(settable) |
| Air source | ≥0.5MPa |
| Tester size | W1000xD1180xH2415mm |
| Weight | About 420kg |
| Power supply | AC220V 50Hz 5A or specified by user |
