Lab PVC EVA Two Roll Rubber Mixing Mill Plastic Material Calender
Equipment
Application:
It is widely used in rubbers and plastics industry for polymer
mixing, such as PVC, color master batch. It consists of roll,
bearing, gap adjusting device, electric control system, safety
device, etc.
ZL-3018 Two roll mill.pdf
Introduction:
The open mill is the abbreviation of the open type plastic mill. In
the plastic product factory, people are used to calling it a
two-roll machine. The open mill is a kind of plastic mixing
equipment that has been used earlier in plastic products production
plants. In the calender production line, the function of the open
mill before the calender and after the mixer is to knead and
plasticize the evenly mixed raw materials, so as to provide a more
uniform molten material for the calender to calender the plastic
products. When producing cable material, the open mill can directly
smelt and plasticize the powdered material mixed according to the
formula into a molten material, and then press and mold it into a
sheet-like belt, so that the pelletizer can cut it into granules.
In the production line of floor leather, it can directly provide
the bottom coating with mixing and plasticizing for the cloth
leather. The recycled waste plastic films (sheets) can also be
re-plasticized on the open mill.
Technical parameters:
| Model | | ZL-3018-76 | ZL-3018-120 | Zl-3018-160 | ZL-3018-200 | Zl-3018-230 | Zl-3018-300 | ZL-3018-400 |
| Diameter of roll | mm | 76 | 120 | 160 | 200 | 230 | 300 | 400 |
| Length of roller face | mm | 300 | 350 | 350 | 500 | 650 | 650 | 900 |
| Mixing Capacity | kg | 0.002-0.6 | 0.002-2 | 0.002-2.8 | 0.002-5 | 0.005-10 | 1-15 | 5-30 |
| Front roll surface speed | rpm | 19 | 19 | 19 | 19 | 19 | 19 | 19 |
| Friction ratio | | 1:1.30 | 1:1.35 | 1:1.35 | 1:1.35 | 1:1.27 | 1:1.27 | 1:1.27 |
| Roll gap range | mm | 0-3 | 0-6 | 0-6 | 0-8 | 0-12 | 0-12 | 0-15 |
| Driving Power | KW | 1 | 1.5 | 2.2 | 7.5 | 11 | 30 | 37 |
| Heating Mode | Electricity heating , Oil Heating ( option) |
| Cooling Mode | Water Cooling ( option) |
| Roll Temperature | Room temperature -- 300℃ |
| Roll Hardness | HRC 50 ~ 60 |
| Temperature Accuracy | ± 2 ℃ (we adopt the high accuracy PID micro computer controller) |
| Safety device | It have 6 safety buttons and safety guard is option |
| Machine weight | kg | 160 | 460 | 660 | 860 | 1960 | 2960 | 3800 |
| Overall dimension | mm | 1100x400x1180 | 1100x550x1380 | 1200x650x1380 | 2200x750x1380 | 2200x950x1580 | 2600x950x1580 | 5295x1789 x170 |
| Power | 380V 3 phase 50-60hz |
Advantage Service:
1. We have R&D, designing department which can not only provide
technological machines but also can satisfy special customized
needs of our clients.
2. Over 50 years’ manufacturing experience, advanced machine and
sophisticated handcraft.
3. There are TWO laboratories in our factory: Environmental
laboratory and Physical laboratory.
4. Our factory have adequate stock monthly, which can meet
customers’ urgent needs.
5. Annual sales over 1,000,000USD; 30,000㎡manufacturing base,
equipped with 120 technicians, we are capable to take large budget
project.
Technical Support:
1. SUS Stainless plate is cut by advanced leaser machine which can
ensure accuracy; All machine appearance is anti-rust electrostatic
painting;
2. Imported electronic components:
ABB/Siemens/Panasonic/Saginomiya/Danfoss/Emkarate/Omron and
imported compressor:BOEK/TECUMSEH, which can keep the machine’s
service life over 10 years.
