Factory Directly 110L 150L 200 Liter Plastic Mixer Rubber
Dispersion Kneader Price
Basic knowledge of internal mixer Basic structure
The internal mixer is generally composed of an internal mixing
chamber, two relatively rotating rotors, an upper top bolt, a lower
top bolt, a temperature measurement system, a heating and cooling
system, an exhaust system, a safety device, a discharge device and
a recording device. The surface of the rotor has helical protruding
ribs, and the number of protruding ribs is two, four, six, etc. The
cross-sectional geometry of the rotor is triangular, cylindrical or
elliptical, and there are two types of tangential and meshing. .
The temperature measurement system is composed of thermocouples,
which are mainly used to measure the temperature change in the
mixing chamber during the mixing process; the heating and cooling
system is mainly used to control the temperature of the rotor and
the surface of the chamber wall in the mixing chamber.
Detailed Product Description:
The machine is suitable for rubber, plastic, chemical and other
industries. The most suitable mixtures: EVA, rubber, TPR, sole,
rubber roller, hose, belt, sponge, shockproof and heat insulation,
elastic coding, sealing material, tire, tape, masterbatch, pigment
and ink.Electric rubber, compound.
The feature for dispersion kneader:
1. An automatic temperature and time control system to provide a
100% mixing result.
2. Easy to clean chamber and changing colors.
3. In6~10minutes/batch of output equivalent to 2 units of open
mixing mill.
4. Pressurized and sealed mixing chamber to provide high mixing
performance and prevent the environment.
5. Easy installation, operation and maintenance, lower the running
cost.
Technical parameters:
| MODLE | UNIT | ZL-3011 -0.5 | ZL-3011 -1 | ZL-3011-3 | Zl-3011-5 | ZL-3011-10 | Zl-3011-15 | ZL-3011-20 |
| Volume | L | 0.5 | 1 | 3 | 5 | 10 | 15 | 20 |
| Drive motor | kw | 1 | 2.2 | 5.5 | 7.5 | 15 | 22 | 30 |
| Turning motor | kw | 0.2 | 0.2 | 0.4 | 0.4 | 0.75 | 1 | 1.5 |
| Turning angle | | 110 | 110 | 110 | 110 | 110 | 110 | 110 |
| Air compressor | kw | 2.2 | 2.2 | 2.2 | 2.2 | 5.5 | 5.5 | 5.5 |
| Water cooling | mpa | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.3-0.4 | 0.3-0.4 |
| Electric heating | Kw | 0.8 | 0.8 | 1.2 | 1.8 | 1.9 | 2.1 | 4 |
| Weight | KG | 500 | 800 | 1000 | 1200 | 2300 | 2800 | 4500 |
| Remark: Electricity heating & Water cooling ( option) |
Download Brief:
ZL-3011A Banbury mixer-kneader.pdf
Advantage Service:
1. We have R&D, designing department which can not only provide
technological machines but also can satisfy special customized
needs of our clients.
2. Over 50 years’ manufacturing experience, advanced machine and
sophisticated handcraft.
3. There are TWO laboratories in our factory: Environmental
laboratory and Physical laboratory.
4. Our factory have adequate stock monthly, which can meet
customers’ urgent needs.
5. Annual sales over 1,000,000USD; 30,000㎡manufacturing base,
equipped with 120 technicians, we are capable to take large budget
project.
Technical Support:
1. SUS Stainless plate is cut by advanced leaser machine which can
ensure accuracy; All machine appearance is anti-rust electrostatic
painting;
2. Imported electronic components:
ABB/Siemens/Panasonic/Saginomiya/Danfoss/Emkarate/Omron and
imported compressor:BOEK/TECUMSEH, which can keep the machine’s
service life over 10 years.
