Melt Flow Index Tester Mass Volumetric Melt Flow Rate
Meter
Download Brief:
ZL-3014B
Automatic Melt Flow Rate Meter.pdf
Rubber Testing Machine:
rubber
machine.pdf
●Product Introduction:
It is used to measure the MFR value of various plastics and resins
passing through a certain temperature and load in a viscous flow
state, passing through a standard die melt flow rate every 10
minutes. It is suitable for polycarbonate, polyarylsulfone,
fluorine, etc. Plastic, nylon and other engineering plastics, also
suitable for polyethylene (PE), polystyrene (PS), polypropylene
(PP), ABS resin, polyoxymethylene (POM), polycarbonate (PC) resin,
etc., with low melting temperature Plastic testing is widely used
in plastic production, plastic products, petrochemical and other
industries, as well as related colleges, scientific research units
and commodity inspection departments.
●Implementation Standards:
ISO 1133:1997 "Determination of Thermoplastic Melt Mass Flow Rate
MFR and Melt Volume Flow Rate MVR"
ASTM D1238 "Standard Test Method for Determination of Melt Flow
Rate of Thermoplastics by Extrusion Plastometer"
●Test Method:
Quality Method
●Display Mode:
Chinese and English color touch screen display
●Product Features:
Chinese and English color LCD display
ØManual and automatic cutting
Dual temperature control system, more precise temperature control
accuracy, higher heating efficiency
ØDual-inlet sensors, the upper and lower temperature gradients are
more accurate, can be used independently, and improve the service
life
ØThe barrel is made of imported Hastelloy alloy nitriding
treatment, the die is made of carbon tungsten steel, and the
materials are solid
ØThe insulation barrel is made of all sus304 stainless steel, which
will not rust for a long time at high temperature
ØAutomatically calculate the results and print out
●The Main Technical Parameters:
| Temperature Range | 0℃-450℃ |
| Temperature Fluctuation | ±0.2℃ |
| Temperature Uniformity | ±1℃ |
| Temperature Display Resolution | 0.1℃ |
| Time Display Resolution | 0.1S |
| Displacement Accuracy | 0.01mm |
| Barrel Diameter | Φ2.095±0.005mm |
| Length of Outlet | 8.000±0.025mm |
| Diameter of Charging Barrel | Φ9.550±0.025mm |
| Weight Accuracy | ±0.5% |
| Output Mode | Miniature automatic printout |
| Cutting Method | Manual and automatic cutting |
| Test Load | A total of 8 levels, 8 sets of weights |
| Power Supply Voltage | AC220V±10% 50HZ |
